Fluke 5320A Multifunction Electrical Tester Calibrator

Up for sale Fluke 5320A Multifunction Electrical Tester Calibrator. It will arrive with a last calibration 2016 with certificate and full test data performed by Fluke.
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes with a 30-day right of return should it not perform to your expectations. Please review pics and text carefully before buying to verify accuracy of description. If you don't see it in the pictures, it is not included.

Package includes:

• Fluke 5320A unit
• Cable power
• Hard case
• 30-day return

Broad workload coverage The 5320A calibrates a broad range of equipment, including:

• Hipot testers
• Insulation resistance testers (megohm meters)
• Loop/line impedance testers
• Continuity testers
• Earth resistance testers
• Ground bond testers
• Leakage current testers
• Circuit breaker testers (RCD/GFCI)
• Multifunction installation testers
• Portable appliance testers (PATs)
• Medical electrical safety testers

Hipot testers
Electrical safety testing with hipots is an integral part of development and manufacturing of electronic and electrical products, ranging from refrigerators to power supplies to test equipment to cables. Such testing is often required by government regulations to ensure product safety. The Fluke 5320A provides best-in- class hipot calibration of ac and dc voltage. The built-in 1000 V meter measures voltage and current. For voltages over 1 kV, Fluke offers two accessory items: a 10 kV adapter or 40 kV probe. With the 10 kV adapter, ac voltages to 10 kV can be calibrated with 0.5 % accuracy. Either item can be used with the built-in meter to measure voltage or flash voltage over 1000 V.

Insulation resistance testers
The 5320A calibrator sources highohms, high voltage resistors and measures the high voltage output of megohm meters and other portable and bench insulation testers. When calibrating insulation resistance testers up to 1.5 kV, you can select a wide range of continuously variable resistance values, from 10 kΩ to 10 GΩ, with 4½ digit resolution and one single value of 100 GΩ. When calibrating 5 kV insulation testers, the external 10 kV dual function adapter extends the resistors’ range up to 10 TΩ. The adapter functions both as a 1000:1 voltage divider to 10 kV, and as a x1000 resistance multiplier.

Loop/line impedance testers  and ground bond testers
The 5320A calibrator has 16 high power, high current resistors it can source to increase the resistance of a loop or line by a known amount.
Use Scan mode to automatically determine the resistance of the loop, and use Active Loop Compensation mode (5320A/VLC) to compensate for any residual impedance in the loop or line.

Continuity testers and earth (ground) resistance testers
To calibrate these low ohms testers, a calibrator must be able to source precision low ohms. From its low ohms precision resistors, the 5320A calibrator sources resistance values ranging from 100 mΩ to 10 kΩ, with 3½ digits of resolution. Choose 2-wire or 4-wire modes for maximum flexibility.

Leakage current testers
Simulate a leakage current for direct/touch, differential and substitute leakage current methods with 4½ digit resolution from 0.1 mA to 30 mA. The 5320A lets you choose the method that works best for your test, unlike other calibrators that only offer a single method.

Residual-current device (RCD) or ground fault current interrupter (GFCI) testers
The 5320A simulates a circuit breaker (an RCD/GFCI) to verify and calibrate trip current and trip time, without tripping the installation’s current breakers. For most RCD testers, trip times are calculated to an uncertainty of 0.25 ms, to provide better than 4:1 test uncertainty ratios (TUR). Trip current uncertainty is 1 %, which also provides better than 4:1 TURs in most
applications.

Multifunction installation testers
The 5320A has all the functionality needed to calibrate installation testers with insulation resistance, continuity, loop, RCD and earth resistance test capabilities.

Portable appliance testers (PATs)
The 5320A has all the functionality needed to calibrate PATs, with insulation resistance, ground bond, leakage current, flash voltage and load test capabilities.

Medical safety testers
With the broad functionality and high accuracy of the Fluke 5320A, calibrating medical safety testers is a snap, allowing you to add these items to your calibration workload.

Fluke 5320A Specificaitions