Prosoft Technology AN-X2-AB-DHRIO Ethernet Module
Prosoft Technology

Prosoft Technology AN-X2-AB-DHRIO Ethernet Module

Sell New open box Prosoft Technology AN-X2-AB-DHRIO PLC Ethernet & Communication Module.

1,500USD
New Condition
  • Genuine Product
  • Technical Support
  • Worldwide Shipping
Request Quote
PRODUCT DETAILS

Up for sale New Open box Prosoft Technology AN-X2-AB-DHRIO PLC Ethernet & Communication Module. Come with accessories and 30-day return available.

AN-X2-AB-DHRIO Specifications

Ports
  • 1 RJ45 10/100 Mbps Ethernet port
  • 1 Phoenix 3-pin power connector
  • 1 Phoenix 3-pin network connector
Typical Power Consumption 200 mA @ 12 Vdc or 100 mA @ 24 Vdc
Maximum Power Dissapation 2.4W
Humidity 5% to 95% RH, with no condensation

Remote I/O Scanner Features:
This mode allows users to replace their existing Remote I/O PLC with a ControlLogix or CompactLogix PAC without having to replace existing racks of I/O.

  • Build new controller program without interrupting existing controls, minimizing downtime
  • Supports up to 32 racks of Remote I/O
  • Supports all Remote I/O baud rates (57.6, 115.2, and 230.4 K baud), and Remote I/O addressing 0 to 76 octal
  • Works with both ControlLogix or CompactLogix
  • Auto-Configuration utility discovers baud rate and maps discrete I/O reducing configuration errors

Drive:
This mode supports upgrading legacy Allen Bradley drives on Remote I/O to new EtherNet/IP enabled drives.

  • No changes to PLC code required
  • Supports up to 4 EtherNet/IP drives
  • Configurable with 1/4, 1/2 and full rack addressing
  • Supports all PowerFlex drives on EtherNet/IP

HMI
This mode allows legacy PanelViews on Remote I/O or DH+ to be upgraded to a PanelView Plus, PanelView Plus 6 or PanelView Plus 7 on EtherNet/IP.

  • No changes to PLC code required
  • Supports up to 8 PanelViews on the same network
  • Support for DH+ to EtherNet/IP PanelViews upgrades on PLC5 or SLC networks

DH+
This operating mode acts as a bridge between an EtherNet/IP and a Data Highway Plus network.

  • Programming terminals, and/or processors on an EtherNet/IP network can access legacy processors on a DH+ network
  • Download to a PLC5 or SLC through RSLinx
  • Configures through web browser
  • Supports all DH+ baud rates (57.6, 115.2, and 230.4 K baud)
  • Support for DH+ to EtherNet/IP PanelViews upgrades on PLC5 or SLC networks

Flex I/O Scanner
This mode allows PLC's on Remote I/O to connect to and control 1794-AENT EtherNet/IP Flex adapters.

  • Designed to replace obsolete 1794-ASB adapters
  • Supports up to 16 EtherNet/IP connections
  • Each adapter and rack of discrete count as a single connection. Each analog module counts as a single connection